Equipment List
CNC Milling Centers:
Kiwa KNH426X :
Horizontal machining center with a capacity 23.5” X 24”Y 26”Z with a Fanuc 18I control. This machine has a high-speed 15,000 RPM /18.5 HP AC motor-driven spindles for high velocity metal removal. In addition, the 2362 IPM rapids and cutting allow for very efficient machining. This horizontal also offers (2) lightning-quick 6 second pallet rotation with a standard full 4th axis rotary table. High pressure coolant at 1000 PSI plus coolant through for deep drilling difficult materials with incredible speed . The 120-tool magazine and 1.2 sec. tool change time gives us great flexibility for tool options and versatility.
Enshu VMC 430 :
Vertical machining center; capacity 30” X 17”Y 18”Z . 6,000 rpm spindle. Wired for 4th axis Fanuc 10m control
Mazak VTC – 41:
Vertical machining center with a 7,000 rpm spindle. Capacity 30” X 17”Y 20”Z
Mazatrol EIA / Fanuc control
OKK VM7:
Vertical machining center with a 10,000 rpm spindle. BT50 Taper, Capacity 60” X 30”Y 26”Z
Full 4th axis rotary table and wired for 5th axis table.
OKK PCV-50:
Vertical machining center with a 7,000 rpm spindle. Capacity 36” X 20”Y 24”Z
Full 4th axis rotary table and wired for 5th axis table.
HAAS VF-2 :
Vertical machining center with a 8,000 rpm spindle. CAT 40 Taper, Capacity 30” X 16” Y 20”Z
Full 4th axis rotary table.
CNC Lathe Centers:
Mori Seiki SL-5 :
24.4” swing , 42.1” z travel , 4,000 rpm spindle speed. - 10" 3-JAW HYD. CHUCK
- 12 POSITION TURRET - TAILSTOCK
Doosan Puma 2500 XLY :
24” swing, 50” Z Travel, 3,500 rpm spindle. Y-Axis – Live Tooling-10" 3-JAW HYD. CHUCK
12 POSITION TURRET, TAILSTOCK, SCHUNK THL-2 SELF-CENTERING HYDRAULIC STEADYREST
ROTARY TOOL SPINDLE SPEEDS 50-5,000 RPM
Addition Equipment
ASSEMBLY :
Equipped to perform operations from Small to large close tolerance structures, such as part marking, hardware, riveting per GSS15302 and GSS15303, helicoil installations etc.
Capabilities of performing requirements per MIL-STD’S and ASTM specs.
CONVENTION MILLING:
Bridgeport :
Series II – digital readout & power feeds - (2)
CONVENTION TURNING:
Pratt & Whitney Engine Lathe :
Full collet system / .5 to 1.5 capacity
3 & 4 jaw chucks 16” swing over bed
Fully equipped with tailstock & steadyrest, etc.
CONVENTION DRILLING:
Delta Gang Press:
(2) Spindles
GRINDING:
Jakobsen surface grinder : 6” x 18” magnetic chuck
Baldor bench grinder : 6” wheels
Baldor diamond wheel grinder: Rgh & finish wheels 6”
METAL CUTTING MACHINES:
Doall : Vertical band saw with throat depth of 2’
Delta : Horizontal band saw 8” dia bar capacity
METAL ENGRAVING MACHINE:
Kwik Mark KM-64 Peen Marker machine using Kwikpro software and Kwik Turn Cylindrical / Indexing
ABRASIVE:
4” Belt sander – (2)
Multiple hand grinders
Glass Beading machines – (2)
5 Deburring Stations
TUMBLING:
Burr – Bench vibratory finisher
Ray Tech bowl type tumbler